Latest products
equipment.
by：Dajin caster
2020-06-15
Industrial vacuum cleanerU-MAX VAC-U-
Introduction to vac max-U-
The company said the MAX 1050 continuous dutyindustrial vacuum provides a filter area of 100% and an atmospheric anti-blowing system that allows power-on cleaning of the filter.
The model 1050 also includes larger wheels, moving from 10 to 10. to 14 in.
In front and replace single 8-in.
Back Castle with double 8in.
Rotary casters for increased operability.
It can be used for combustible and non-combustible
Combustible materials of 10 or 15 horsepower. (800)822-8629Vac-U-Max. com [
Slightly] IllustrationsB 3-
American Italian company D lamination technology
Italpresse USA introduces the template 209/P designed to laminate natural wood veneers on raised cabinets and furniture door panels, forming on one side and leveling on the other.
Optional double
Film packaging, the machine can laminate the veneer on the raised panel for the two-sided forming of the channel door.
The month of the formation-
According to the company, D lamination technology uses the hot fluid after the film instead of compressed air to improve the heat transfer to the glue line, and the molding pressure is higher than the pressure using compressed air. (888)743-8505 ltalpresse.
Com C vacuum tube lift from Schmalz
Schmalz introduces JumboErgo vacuum tube lifts for CNC Machining Center loading and unloading.
JumboErgo is equipped with multiple suction cups and pneumatic rotary units, allowing flexible loading and unloading of wood boards and furniture parts for CNC woodworking centers.
The PSE pneumatic rotary device can pick up the workpiece from the vertical transport tray and rotate it 90 [degrees]
There is no discord, the company said.
According to the company, combined with the rotary crane installed with SK columns, only one person is required to perform ergonomic work at any working height. (919)713-0880 Schmalz.
The American D woodworking blade IRWIN tool introduces the blade of IRWIN marble woodworking series.
Lasercut thin cut saw blade with extra features
Sharp, oversized carbide teeth with long service life and repeated use many times
The company said it was a pencil sharpener.
Thermal Design-resistant, non-
In order to reduce the glue of clean cutting, the saw blade can be widely used with various materials.
They\'re in 10-in.
Diameter 24-, 40, 50-, 60-, 80-, and 84-toothcount, 12-in.
40 in diameter ,-60-, 80-, 96-, and 100-
Number of teeth andan 8-in.
Stacked dado set. (800)GO-IRWIN Invin.
Com E automatic nesting unit Biesse America Biesse with tags introduces Biesse skill FT-
NEST base station NBC.
It is a fully automated production unit nested
Manufacturing-based, including automatic labels or labelsdemand.
Biesse skills are a flexible solution designed to increase production and efficiency, the company said.
The unit consists of a loading table, a skill ft cnc router, and an unloading conveyor belt. [
Slightly] Illustrations(877)824-
BiesseAnienert 3773.
Ice/International cemented carbide & Engineering Co.
ICE has launched a 905-inch welding and turning grinder with laser rails and vacuum cleaners.
It is designed to eliminate weld thickening (mushrooming)
From narrow band saw blades to 3 in.
The company says the wiide will provide robust welded joints for optimal blade and machine performance.
Laser Guide and miniature for welding flip grinderheight-
Adjustment Mechanism of precise pointsof-
Contact positioning of grinding wheel and band saw blade surface.
Electronic control vacuum cleaners and accessories are also included. (800)424-3311 ICE-VA. Explosion-
Dust-proof TM collection general international general introduction Model 10-
350 M1, M2 and M3 3HP vacuum cleaners in explosion-proof series. The 10-
The 350 dust collector is designed for a fully enclosed dust collector for continuous use with negative pressure to ensure all air return is filtered.
The filter will be cleaned automatically to facilitate maintenance and extend the life of the tank, and the system is designed as a permanent pipe to help provide a clean and dust-free shopping environment, the company said. [
Slightly] Illustrations(514)326-1161 General. ca H NESTED-
Based on the manufacturing industryR. Onsrud Inc. C. R.
Onsrud provides a fully automated nesting
The Mate series, Tech series or Panel Pro series CNCrouters offer manufacturing-based solutions.
It starts with Onsrud\'s fully automatic material feeding system.
After the forklift loads the material, the operator presses the corresponding button to start, and the system will accurately load the vacuum workbench of the CNC router and then start the machine cycle.
Automatic Pre-availability
Label system will pre-
When paper is waiting to load, print and place labels using the panel loader. (800)638-8185 CROnsrud. com [
Slightly] Illustrations
I press the Wilma American company.
Wilma USA offers a 1500 m press machine.
The company also offers a variety of press presses to compress dust, shavings and debris, as well as debris, which often generates waste in the workplace.
The compact form of the coal balls makes them easy to transport and can be used as a source of fuel in some cases.
No glue or adhesive was used as adhesive, the company said. (803)802-
7170 WeimaArnerica.
The company said that the com J tool management software TESOL igence provides preventive maintenance planning and maintenance ticket functionality through its existing tool management, at no additional cost, features maintenance features that are easy to use and integrated into the functionality of the tool management software.
Maintenance personnel can receive emails or text messages when the scheduled project expires, create a maintenance ticket, etc.
Additional features include the ability to view and group machines according to the manufacturer, model, age, circuit breaker, voltage and other custom fields, such as the customer\'s wishes. (877)720-
8665 intooligence.
Moisture tracker and data recorder, lignommat Co. , Ltd.
Lignomat introduces moisture tracker and humidity data recorder with built-in-
Out of range alarm.
The machine is used for storage and tracking at the customer site during manufacturing, transportation, installation and after.
Istoisture Tracker, which can help monitor moisture changes, can work as three different permanently installed moisture meters and a station that measures relative humidity, the company said.
It provides a tool for wood or finished products to monitor any type of storage area. (503)257-
8957 lignmatusa.
Global Solutions (GFS)
Offers a wide range of products for the woodworking industry.
As one of the leaders in Heat Transfer Technology, GFS manufactures a compact BatchProcess oven that provides an economical solution to space constraints, the company said. The uni-
The flow air distribution system cycles the heated air on both sides of the oven to achieve a balanced, uniform temperature. (800)-848-
Global finishing 8738com [
Slightly] Illustrations
M plug-in tool H3D Tool Company\'s multi-task plug-in head
The company said it provided answers for manufacturers who frequently change profiles, produce small or various profiles to produce small ones.
Head at 40mm-50mm -60mm -
Provides 80mm cut width for multi-function and profile changes.
The company says it aims to enable users to change their profile designs quickly, easily and cheaply to meet customer requirements. (888)544-3726 3D-Diamond.
Com N spray gun EXEL North American Kremlin Rexson offers Airmax AVX and ATX spray guns with fine and extra spray tips compatible with a large number of solvent products
Faster and better flushing system based on and waterbourne, easy to maintain. (800)573-
5554 KremlinRexson-Sames.
Storage Retrieval and inventory management Stiles Machinery Inc.
Stiles Machinery introduces the smart store system of bargsteedt.
The company said it was fully automated to load, retrieve, stack and provide right-hand panel inventory for each work and to evaluate the remaining materials for reuse.
It can run during shutdown
Supplement or pre-arrange for the next day\'s production.
The company said that IntelliStore aims to increase machine capacity, reduce material damage, save time and labor, provide board supplier verification and prioritize orders based on picking location to increase production speed. (616)798-
7500 StilesMachinery.
Com P vacuum operation pin stop better vacuum cup company
The better vacuum cup introduces the new BVC pin stop PSR1048, and the avacuumoperated pin stop is designed for flat/grid table routers.
The company said the pin stop allows the user to arrange multiple parts on the CNC, press gobutton and walk away. (877)872-2821 GreenBVC. com Q MULTI-
Head modular tool system for Stanley Black & Decker Inc. [
Slightly] Illustrations
Black & Decker has launched more
The head matrix modular tool system revolves around three different basic power devices and replaceable accessories to drill, cut, Polish, etc, the company said.
The patented matrix modular tool system is available in 12 v max, 20 v max and 4 v max.
0 amp ACbase power unit with drill bit/drive attachment for each unit.
Battery-free also provides a light lithium
The ion battery is charged for up to 18 months.
In addition to the drill/DRIVE accessories attached to the basic power unit, the system has six accessories that can be purchased separately. (800)544-
Blackdecker 6986
The latest version of the ArtCAM Pro woodworking application design and manufacturing software ArtCAM developed the com R free relief modeling software ArtCAM is designed to make it easier to create complex designs, especially those elements that are similar but not identical in the design.
Free relief modeling allows picking, moving, rotating, re-adjusting and copying previously created relief individually or as part of a group.
Any part of the design can be isolated, edited, and then regrouped into a group for copying or further editing at any point within the group and in the process, you can save a single project or a group of projects in the clipart Library. (877)335-2261 ArtCAM. com HEAVY-
Powermatic heavy duty lathe with sliding main seat introduces 42 24b type wood lathe.
Features include sliding headbox with electronic speed change and digital RPMreadout for precise speed adjustment and spindle locking
Install the index on the headbox for drilling patterns, routing flutes, and other features.
The company and people under the age of 15 say the vacuum system of the lathe provides a way to quickly clamp the bowl blanks
Amp four sockets are provided for easy access to power accessories.
The new lathe also includes an air nozzle with a quick connection, two 100W mission lights for lighting and an elf-
Laser-etched feather pen.
The included tool box provides accessories such as center, wrench, etc. There is storage space for extra accessories inside the tail rack. A magnetic-
The supported on/off switch can be moved anywhere on the machine. (800)274-6848 Powermatic.
Introduction to vac max-U-
The company said the MAX 1050 continuous dutyindustrial vacuum provides a filter area of 100% and an atmospheric anti-blowing system that allows power-on cleaning of the filter.
The model 1050 also includes larger wheels, moving from 10 to 10. to 14 in.
In front and replace single 8-in.
Back Castle with double 8in.
Rotary casters for increased operability.
It can be used for combustible and non-combustible
Combustible materials of 10 or 15 horsepower. (800)822-8629Vac-U-Max. com [
Slightly] IllustrationsB 3-
American Italian company D lamination technology
Italpresse USA introduces the template 209/P designed to laminate natural wood veneers on raised cabinets and furniture door panels, forming on one side and leveling on the other.
Optional double
Film packaging, the machine can laminate the veneer on the raised panel for the two-sided forming of the channel door.
The month of the formation-
According to the company, D lamination technology uses the hot fluid after the film instead of compressed air to improve the heat transfer to the glue line, and the molding pressure is higher than the pressure using compressed air. (888)743-8505 ltalpresse.
Com C vacuum tube lift from Schmalz
Schmalz introduces JumboErgo vacuum tube lifts for CNC Machining Center loading and unloading.
JumboErgo is equipped with multiple suction cups and pneumatic rotary units, allowing flexible loading and unloading of wood boards and furniture parts for CNC woodworking centers.
The PSE pneumatic rotary device can pick up the workpiece from the vertical transport tray and rotate it 90 [degrees]
There is no discord, the company said.
According to the company, combined with the rotary crane installed with SK columns, only one person is required to perform ergonomic work at any working height. (919)713-0880 Schmalz.
The American D woodworking blade IRWIN tool introduces the blade of IRWIN marble woodworking series.
Lasercut thin cut saw blade with extra features
Sharp, oversized carbide teeth with long service life and repeated use many times
The company said it was a pencil sharpener.
Thermal Design-resistant, non-
In order to reduce the glue of clean cutting, the saw blade can be widely used with various materials.
They\'re in 10-in.
Diameter 24-, 40, 50-, 60-, 80-, and 84-toothcount, 12-in.
40 in diameter ,-60-, 80-, 96-, and 100-
Number of teeth andan 8-in.
Stacked dado set. (800)GO-IRWIN Invin.
Com E automatic nesting unit Biesse America Biesse with tags introduces Biesse skill FT-
NEST base station NBC.
It is a fully automated production unit nested
Manufacturing-based, including automatic labels or labelsdemand.
Biesse skills are a flexible solution designed to increase production and efficiency, the company said.
The unit consists of a loading table, a skill ft cnc router, and an unloading conveyor belt. [
Slightly] Illustrations(877)824-
BiesseAnienert 3773.
Ice/International cemented carbide & Engineering Co.
ICE has launched a 905-inch welding and turning grinder with laser rails and vacuum cleaners.
It is designed to eliminate weld thickening (mushrooming)
From narrow band saw blades to 3 in.
The company says the wiide will provide robust welded joints for optimal blade and machine performance.
Laser Guide and miniature for welding flip grinderheight-
Adjustment Mechanism of precise pointsof-
Contact positioning of grinding wheel and band saw blade surface.
Electronic control vacuum cleaners and accessories are also included. (800)424-3311 ICE-VA. Explosion-
Dust-proof TM collection general international general introduction Model 10-
350 M1, M2 and M3 3HP vacuum cleaners in explosion-proof series. The 10-
The 350 dust collector is designed for a fully enclosed dust collector for continuous use with negative pressure to ensure all air return is filtered.
The filter will be cleaned automatically to facilitate maintenance and extend the life of the tank, and the system is designed as a permanent pipe to help provide a clean and dust-free shopping environment, the company said. [
Slightly] Illustrations(514)326-1161 General. ca H NESTED-
Based on the manufacturing industryR. Onsrud Inc. C. R.
Onsrud provides a fully automated nesting
The Mate series, Tech series or Panel Pro series CNCrouters offer manufacturing-based solutions.
It starts with Onsrud\'s fully automatic material feeding system.
After the forklift loads the material, the operator presses the corresponding button to start, and the system will accurately load the vacuum workbench of the CNC router and then start the machine cycle.
Automatic Pre-availability
Label system will pre-
When paper is waiting to load, print and place labels using the panel loader. (800)638-8185 CROnsrud. com [
Slightly] Illustrations
I press the Wilma American company.
Wilma USA offers a 1500 m press machine.
The company also offers a variety of press presses to compress dust, shavings and debris, as well as debris, which often generates waste in the workplace.
The compact form of the coal balls makes them easy to transport and can be used as a source of fuel in some cases.
No glue or adhesive was used as adhesive, the company said. (803)802-
7170 WeimaArnerica.
The company said that the com J tool management software TESOL igence provides preventive maintenance planning and maintenance ticket functionality through its existing tool management, at no additional cost, features maintenance features that are easy to use and integrated into the functionality of the tool management software.
Maintenance personnel can receive emails or text messages when the scheduled project expires, create a maintenance ticket, etc.
Additional features include the ability to view and group machines according to the manufacturer, model, age, circuit breaker, voltage and other custom fields, such as the customer\'s wishes. (877)720-
8665 intooligence.
Moisture tracker and data recorder, lignommat Co. , Ltd.
Lignomat introduces moisture tracker and humidity data recorder with built-in-
Out of range alarm.
The machine is used for storage and tracking at the customer site during manufacturing, transportation, installation and after.
Istoisture Tracker, which can help monitor moisture changes, can work as three different permanently installed moisture meters and a station that measures relative humidity, the company said.
It provides a tool for wood or finished products to monitor any type of storage area. (503)257-
8957 lignmatusa.
Global Solutions (GFS)
Offers a wide range of products for the woodworking industry.
As one of the leaders in Heat Transfer Technology, GFS manufactures a compact BatchProcess oven that provides an economical solution to space constraints, the company said. The uni-
The flow air distribution system cycles the heated air on both sides of the oven to achieve a balanced, uniform temperature. (800)-848-
Global finishing 8738com [
Slightly] Illustrations
M plug-in tool H3D Tool Company\'s multi-task plug-in head
The company said it provided answers for manufacturers who frequently change profiles, produce small or various profiles to produce small ones.
Head at 40mm-50mm -60mm -
Provides 80mm cut width for multi-function and profile changes.
The company says it aims to enable users to change their profile designs quickly, easily and cheaply to meet customer requirements. (888)544-3726 3D-Diamond.
Com N spray gun EXEL North American Kremlin Rexson offers Airmax AVX and ATX spray guns with fine and extra spray tips compatible with a large number of solvent products
Faster and better flushing system based on and waterbourne, easy to maintain. (800)573-
5554 KremlinRexson-Sames.
Storage Retrieval and inventory management Stiles Machinery Inc.
Stiles Machinery introduces the smart store system of bargsteedt.
The company said it was fully automated to load, retrieve, stack and provide right-hand panel inventory for each work and to evaluate the remaining materials for reuse.
It can run during shutdown
Supplement or pre-arrange for the next day\'s production.
The company said that IntelliStore aims to increase machine capacity, reduce material damage, save time and labor, provide board supplier verification and prioritize orders based on picking location to increase production speed. (616)798-
7500 StilesMachinery.
Com P vacuum operation pin stop better vacuum cup company
The better vacuum cup introduces the new BVC pin stop PSR1048, and the avacuumoperated pin stop is designed for flat/grid table routers.
The company said the pin stop allows the user to arrange multiple parts on the CNC, press gobutton and walk away. (877)872-2821 GreenBVC. com Q MULTI-
Head modular tool system for Stanley Black & Decker Inc. [
Slightly] Illustrations
Black & Decker has launched more
The head matrix modular tool system revolves around three different basic power devices and replaceable accessories to drill, cut, Polish, etc, the company said.
The patented matrix modular tool system is available in 12 v max, 20 v max and 4 v max.
0 amp ACbase power unit with drill bit/drive attachment for each unit.
Battery-free also provides a light lithium
The ion battery is charged for up to 18 months.
In addition to the drill/DRIVE accessories attached to the basic power unit, the system has six accessories that can be purchased separately. (800)544-
Blackdecker 6986
The latest version of the ArtCAM Pro woodworking application design and manufacturing software ArtCAM developed the com R free relief modeling software ArtCAM is designed to make it easier to create complex designs, especially those elements that are similar but not identical in the design.
Free relief modeling allows picking, moving, rotating, re-adjusting and copying previously created relief individually or as part of a group.
Any part of the design can be isolated, edited, and then regrouped into a group for copying or further editing at any point within the group and in the process, you can save a single project or a group of projects in the clipart Library. (877)335-2261 ArtCAM. com HEAVY-
Powermatic heavy duty lathe with sliding main seat introduces 42 24b type wood lathe.
Features include sliding headbox with electronic speed change and digital RPMreadout for precise speed adjustment and spindle locking
Install the index on the headbox for drilling patterns, routing flutes, and other features.
The company and people under the age of 15 say the vacuum system of the lathe provides a way to quickly clamp the bowl blanks
Amp four sockets are provided for easy access to power accessories.
The new lathe also includes an air nozzle with a quick connection, two 100W mission lights for lighting and an elf-
Laser-etched feather pen.
The included tool box provides accessories such as center, wrench, etc. There is storage space for extra accessories inside the tail rack. A magnetic-
The supported on/off switch can be moved anywhere on the machine. (800)274-6848 Powermatic.
Custom message
