granulators, pulverizers and shredders.

Ladder Plastic Machinery Co. , Ltd. Beside-the-
Injection molding press grinder from 3 to 50 hp, throat from 8x10 in. to 24 x 36 in. AEC, INC.
Granulator, Shredder, film recycling and full size-
Restore the system. AK under-the-press, auger-
There are 10 types of feed granulators, 6x8. to 12 x 30 in.
Cutting Room including 6x6 in.
Model of small molding machine. Low-
The speed granulator accepts the pouring of a robot or conveyor.
Cutting Room from 6x8. to 12 x 20 in.
Bold series granulators suitable for bottles and other bulky shapes. Tangential-
Feeding cutting chamber for 8x10. to 30 x 30 in. Large-
Part of the central granulator for high
Volume recovery, piping and thickness-wall parts.
14 Open, solid or staggered rotor designs.
Cutting Room from 14x24 in. to 36 x 72 in.
The shredder has a counter-spin axis that alternately stacks the tool, avoiding anti-excitation and maximizing energy efficiency.
Nine in a singleor two-
Stage configuration.
Opti-two granulator seriesAngle cutting-
Room design, mixing of straight drops-
Through the chamber and the tangent chamber. Medium-duty, beside-the-
16-1600 seriesin.
There are 20 cutting rings-to 34-in. -
Wide cutting room. Heavy-
Central 2200 series duty, 22-in.
There are 38 cutting rings-to 66-in. -
Wide cutting room.
Air Products and ChemicalsCryo-
Low temperature grinding and recovery systems reduce hard-to-
Grind the material without affecting the thermal history.
Liquid nitrogen for materials (-320 F)
On the cooling conveyor belt
The brittle material enters the grinder, where additional nitrogen can be injected to remove the heat generated by the grinding.
Recycle nitrogen steam.
Australian instrument blowing technology
Untha shredder with four patents
The shaft system provides high throughput.
It is said that the extra rollers can feed better than the two rollers
The shaft shredder and the production of smaller particle sizes.
BALL & JEWELL/DIV.
In addition to the sterling MVP and BP seriesthe-
News granulator in various sizes and throughput.
The new MVP unit has a wider cutting chamber opening and knife opening design for easy cleaning and maintenance. Double-
The wall base leads to quiet operation. High-Torque standard-
The speed configuration produces a high quality of heavy grinding.
The unique Hopper inlet speeds up cleaning.
There are many configurations, rotor types, Hopper types and motor sizes.
Cut edge of CG Series-
Feeding granulator is provided in 8x12 in. to 16 x 26 in. for large thin-
Heavy parts of the wall.
The VGM1634 granulator features a new cut interior lining.
Standard features include three
Blade opening rotor, 40-
And hydraulic hopper opening device.
The professional granulator includes the LT series, which features a wide cutting chamber of 12x32 in. to 12 x 56 in.
Online or offline
Reduce the line size of wide sheet and skeleton scrap from thermoforming operation.
New electrical line-and hydraulic-
Electric shredder/granulator system, specifically reduced size for large bulky equipment
Parts and scrap like cleaning, edge decoration and paper materials.
As a single
Stage shredder or double
Stage shredder/granulator system.
The unit is available with a cutting chamber from 14x20. to 78 x 43 in.
Driven by a single or paired motor.
Two parallel hexadecimal systems
Hook\'s key shaft power-to-spin bed-
Type cutter for absorbing, crushing and crushing waste. High-torque and low-
The speed rotation provides safer and quieter operation, reducing wear and tear of the anti-excitation and cutting service. LOUIS P. BATSON INC.
Durable granulator for CBCL/high field from 5 hp to 150 hp.
The pulverizer system for pre-grinding and crushing scrap to powder has an easy-to-close crushing segment for quick replacementout.
The industrial \'Andrea industrial shredder of 5 to 225 hp combines high torque with low speed to achieve a consistent size reduction.
Customized design is available. C. S. BELL CO.
Hammer Mill for crushing and grinding.
Dimensions controlled by the screen inserted into the grinding room.
Modification of standard units and custom manufacturing.
Sizes range from 2 to 15 horsepower.
Carter International LimitedOffers high-
Torque shredder.
COMET Automation Systems Co. , Ltd. Offers a low-speed (30 rpm), screenless S-
Plastek summit of milling cutter grains.
CONAIR shrink the complete series of the system from the next sizethe-
Pressure models for injection parts to units for blow molding applications, thermoforming granulators, for pipes/profiles, paper and film, and heavy extrusion granulators
Central granulator and Shredder on duty for all processes. For meter-
The company offers the CM, CR and CLS series granulators for application through robots, conveyors or manual feeding.
No screen CM series for low
Throughput gate and runner-up application.
The CR series features a staggered rotor with a one-time card knife that eliminates the re-grinding and reset. CLS beside-the-
The pressure granulator also has a staggered rotor with a drop
One-time card knife. Low-
High production of Rpm CLS units
Get high quality RE-grinding from the runner and runner. CHS general-
Purpose granulator is suitable for bulk feeding of parts and runners, including tough engineering resin, with standard staggered rotor and cartridge cutter, or optional open rotor with scissorscutting action.
Economic CE series with high
Rpm rotor with scissors and Open design
Cutting, adjustable rotor knife.
CB and CG granulators have round-cutting chambers and scissors-
Cut open rotor for grinding bulky parts up to 1000 lbs/hr.
The adjustable rotor knife ensures a constant cutting circle and includes the overall soundproof cover below85dbA cutting.
Modular CG unit with larger cutting chamber and higher cutting chamberhp drives.
The CW series Central granulator can handle up to 2200 lbs/hour.
Large swing of equipment for easy maintenance
The open front panel allows unimpeded access to the rotor and tool.
The removable screen, screen holder and particle trap box are mounted on the door and swing horizontally away from the rotor. This swing-
Reduced open functionality-feed height.
The cutting chamber can be configured to cut, modify the cut or limit the feed. Heavy-
Thick-duty central granulator
Wall pieces, pipes and clear grinding include units capable of grinding up to 10,000 lbs/hour.
Scissors in the unit-
Falling knife-
The screen holder below, the double flying wheel, the choice of rotor design. Optional semi-closed, hog-
Each section has four staggered sections and five types of cutting knives the rotor can handle cleaning and other bulky thickness conveniently-walled parts. UP under-the-
Press Machine for handling thermoforming skeleton and web scrap up to 55 in.
Including efficient roll-type design and separate feeding-
Rolling drive motor, blower for re-grinding evacuation and integrated sound insulation cover.
Control measurement Co. , Ltd.
There are 8 granulators from Exact, Italy. 5-or 20-
Hp motor and heat-plastic film and sheet for recycling up to 650/min and 440 lb/hr.
Remove the decoration from the winding machine continuously by feeding roller or preloader, and remove the roller waste from the winding rack. Adjustable in-
The feeding channel folds the film into a multi-layer strip. Diamond-
The inclined steel roller will shrink the pressure into halfrigid strand.
The cutting wheel rotates against the counter blade, cutting the strands into highly compacted pieces.
The Wenchang system transmits the chip to a storage device or to a return extruder.
CRESSWOOD recycling system. OF DUN-
RITE tools & MachinesHF-6850 hopper-
Fed grinder with 50-in.
Rotor length, large hopper opening and expanded cutting chamber size, to accommodate and handle heavy cleaning, scrap parts, waste distribution packaging, paper, bulky scrap, film, dense end decoration and piping/profiles.
Suitable for reducing the size or re-grinding the finished product to a predetermined particle size.
Throughput can be optimized by selecting the tool, tool position and one of the five standard rotor designs.
Also built several styles of lowspeed, single-
Shaft shredder opening from 12 to 72.
Cumberland engineeringUnder-the-press, beside-the-
Media and central pig
Shredder/granulator, as well as automated recycling systems including post-customized equipment
Consumer recycling. Robot-and conveyor-
The Fed granulator includes a quiet sidethe-
Press the throat size model from 6x8 in. to 18 x 36 in.
Throughput from 250 to 1000/hour. Medium-to heavy-
Duty granulator with advanced rotor design for recycling bulky parts, film, paper, filament, foam and heavy-Duty-wall pipe.
Size from 14x26. to 24 x 56 in.
Capacity reached 5000/hour. Extra-heavy-
The duty unit of 18x28 in. to 32 x 50 in.
For tough materials and cleaning, the capacity is up to 10,000/hour. In-
The production line recycling and compaction system for film, paper and fiber reaches 15,000/hour.
The heat forming granulator recycles the skeleton net of the decoration machine to 1500/hour.
Feeding width from 30 to 66.
16 combined shredder/granulator from 1200 to 5000/hour. X-
Intermediate Series
24x28 in on-duty granulator. to 24 x 56 in.
Injection parts, large blow molding parts, opening of film and rear
Consumer containers.
The DISA vortex rotary grinder is designed for high
Bulk material size reduction.
The United States provides the central granulator of the economic grind ES Festival series with three or five rotor knives, ESL (
Low speed coal saver)beside-
News granulator.
ENTOLETER, INC.
Vertical integration line of dimensions-
Reduce equipment and systems.
The precision film granulator has a throat opening from 12 to 60.
Horsepower ranges from 15 to 300. Feature double-
Cut and cut evenly 0. 002 to 0.
004 knife clearance, \"0\" grade precision bearing, easy-to-disassemble screen, and the top of the folding bed for knife maintenance.
The range of the central granulator ranges from 50 to 300 hp, and the throat size ranges from 25 to 49.
All types of materials can be processed, including 55-gal drums. EUROHANSA INC.
Grinder, Shredder and granulator with capacity ranging from 200/hour to 10 tons/hour are provided.
FITZPATRICK Limited.
Blade design, screen size and selection of feed equipment. Stainless-
Steel structure, water jacket and belt for temperature control-, direct-, or variable-speed drives.
Seven sizes from 3 to 150 hp, the rotor is from 5x8 in. to 28 x 17 in.
FitzMill pre-breaks the equipment to reduce the material before subsequent processing.
Recommended Guilocutter model for heating
Sensitive material.
Most important machine manufacturer company
The range of HD series grinders is from 10x14. to 24 x 36 in.
Throat size and 7. 5 to 100 hp.
Throughput from 200/hour to 2000.
The series is designed for the sidethe-
Pressure applications, central grinding or recycling applications, and optional applications in sound attenuation and tilt rotor design.
High across the board-
Shear film grinder for 6 × 8 in. to 16 x 48 in.
Throat size and 3 to 80 horsepower.
Throughput from 50 lbs to 300 lbs/hr.
Designed for film, Edge trim recovery, roller feeder applications or any scissors-
Type cutting action is required. Spiral-
Cut the granulator from 11x16 in. to 11 x 32 in.
Throat size and 20 to 40 horsepower.
Throughput goes from 550 to 900 lbs per hour.
The unique rotor design makes the unit suitable for grinding scrap, cleaning, blocks and bottles.
Hinge cabinet easy to clean. High-
The volume line of the granulator is from 24 36. to 30 x 45 in. throat size.
Throughput from 1200 to 3000/hour.
Series designed for high throughput of large blow molding parts. Special-
Purpose granulator including DSC-18 dual-
Stage grinder designed for grinding large purge
Large diameter 2415. pipe, and SW-
0936 for grinding paper and web below 36 in. wide. Hot-
Melt grinder for processing hot plastic from extruder mold, no need to pre-cooling.
Customization is an option.
Standard features for all units include five
Motor warranty for one year.
Options include offset or center-
Design of feeding cutting chamber.
Complete set of accessories and systems includes solutions for parts and decoration pick-up and delivery, metal separation, fine separation and post-processing
Consumer recycling.
Franklin Miller
DELUMPER mixer DIV.
The Delumper crusher can crush, crush and dehydrate tough materials such as PVC and prevent bridging problems.
The unit is operated at low rpm and with little or no temperature rise.
The machine can be removed quickly for cleaning or repair.
All parts are completely replaceable.
The L series features a smooth drum with replaceable teeth and is rotated by two fixed size Combs. Self-
Clean and feed, it can handle blocks up to the size of the entire entrance opening.
The LM series offers higher capacity through multiple knife sets.
LP series with low friction design for difficult heating
Sensitive, sticky or wet lumps.
More pipeline Delumper
Action, straight-through, ultra-
Directly in a fully enclosed piping system, compact unit fragments, ribs, mixtures, solids in dispersion and suspension fluids.
The flow characteristic of slurry is corrected;
Break down tough objects, plastics, chemicals and wax;
And handle brittle, temperature-or pressure-
Sensitive, rough, wet or dry objects.
The Taskmaster shredder used to reduce bulky items has a fully enclosed dust
Tight body of heavy structural steel.
On two parallel hex axes, the hardened and ground knife discs and gaskets rotate in reverse. Split-
The body frame can easily contact the tool.
Reduce PET/HDPE bottles, barrels, light metal, aluminum cans and tin cans as well as glass cans and bottles. GETECHA INC.
Next to the granulatorthe-
Printing Machine, central system, clean room application and online disc (CD and DVD)systems.
The line includes an angle that cannot be bent-
Next to the rotor granulatorthe-
Application of pressure and grain chamber to state-of-the-art heavy duty-
Able to handle work units above 10,000/hour.
Units for various processes, including injection molding, thermoforming, extrusion, blow molding and compression molding. GLOUCESTER-
Heavy Recycling Products/Services
Edge of heavy bulk-trim, trim-press, beside-the-
News, and spiral
The size of the feed granulator starts at 6x8. to 24 x 40 in.
Drive from 3 to 200 hp.
Straight blades and staggered teeth are available.
Products include brackets
Separate granulator, Shredder, blower, rotary fan, conveyor and complete turnkey package.
Solid structure, simple-
Steep entrance cutting room
Angle, radial knife and solid heart-
Inertia flywheel.
Rotor bearings mounted on the cutting outdoor surface.
Cutting edge feed to prevent anti-excitation.
Reversible rotor tool standard on screw drillfeed, beside-the-press, trim-Press, edge-
Trim pulverizer.
Water cooling is optional for all models. Custom-
The designed soundproof cover keeps the noise level in the middle70 dbA range.
Next to the standardthe-
Media models run in the medium term80 dbA range. Trim-
Grinding heat forming skeleton of pressure granulatorline or off-line.
In addition, recycled wires, profiles, purgings, pipes and blow molding are designed. Backed by two-year warranty. G. F.
Goodman & Sons
The hydraulic guillotine cutter for large molding and cleaning allows the use of smaller, lower cost granulators.
Five models from 19x8 in.
Blade opening to 39x30 in.
60-special guillotinein. wide available.
All models include defensetie-
Force two people-
Manual control and security guard.
Feeding and discharging conveyor and automatic guillotine control system can be provided. GRANUTEC INC. Auger-
Matic granulator/separator automatically restores three of ofsprues and athletes
Parts mold of injection molding machine.
Sizes range from 6x6.
5-cutting roomin. -diam.
Spiral in 16x32. with 10-and 12-in. diam. auger.
Designed for maximum ease of cleaning and maintenance. Optional Pick-a-
The part separator can be driven directly from the screw shaft without additional motor.
Optional hopper can feed other scrap or manually at the same time
Directly into the cutting chamber, or into the spiral groove through a robotmounted hopper. Operator-
Less heat forming granulator designed for integrated automation.
Crusher roller system for handling skeleton mesh/sheet online when the entire thermoforming part is in place.
The FRG series feeds directly from the thermoforming or payment station and has a constant tension control system, an electro-mechanical device for starting/stopping the feed cycle, and an ultrasonic sensor device for monitoring the web/sheet circuit. Multi-Heavy function-
Auger spiral granulator for high-throughput recovery of pre-cut sheet guillontined skeleton. Beside-the-News and big
Throat, low rpm central granulator, throat size from 6x6 in. to 36 x 48 in.
Options include segmentation
Rear rotor type
Feeding chute, combined Hopper for front manual feeding/top robot feeding and feed roller attachment for edge decoration.
Blower evacuation equipment can be provided to minimize re-grinding.
The conveyor can be used for most granulators, and its options include a metal detector and an amplifier feedback system to control the delivery speed of the granulator. High-
Performance of automatic feeding of Sprue selector LPZ series granulator.
Accept standard or low speed drives for future alternative applications.
Saturn system single-
Horizontal stamping rotor
Fed shredder and lowspeed, high-
Torque Rotary shear shredder for pre-treatment block, drools, Flash, ash removal, film, fiber and back
Consumer Plastic of medium size-
Fast granulation or direct entry into the extruder.
Hamilton AVTEC
Granulators and shredders ranging from 35 to 9000/hour include 80 dbA, swing-
Bottom screen bracket, flap Hopper, rotor flywheel, dust-
Rotor Bearing with micro protection
Adjustable bed knife and safety device.
Fine Air-
The scanning pulverizer/grader allows for external fineness adjustment during operation and generates media-
Fine, Superfine particles.
Three sizes: 20. , 38 in. , and 76 in.
The processed products include melamine, PVC, polyester, epoxy and PS.
The Shichuan micron powder system plant includes the Mikro pulverizer, which grinds, mixes and distributes in a dust-free operation.
The device uses a fast moving Hammer for wet grinding and dry grinding. Vertical-impact Mikro-
Grinding heat of ACM classifier-
Sensitive material without coolant. Mikro-
The nebulizer grinds and transports materials in one operation.
Super fine powder is produced. Mikro-
Lab, pilot plant or small batch production Bantam economy factory grind samples below 10g at 200 lb/hr.
Mikro in the lab-
ACM grinder/grader, 1-hp self-
Separate unit with collector, cartridge and dashboard.
In 10-200 lb/hr.
Mesh from 100 to 40 microns. Mikro-
Laboratory, standard and heavy crusher
Working size of large raw materials. Mikron-Separator air-
A classifier of 100 mesh to 5 micron granularity. Mikro-
Sample mill for laboratory grinding.
Sichuan polymer system Publishing Houseside and large-
6x8 in part granulator with feed port. to 16 x 32 in. SPL (below 90 dbA)or Silenator (below 80 dbA)
Models range from 5 to 40 hp.
Convenient service and cleanliness. Auger-
Feeding granulator for 8x8. or 10 x 10 in.
The sound pressure level of the throat or the Silenator version. E-
Series granulators of three sizes (4 x 6 in. , 1. 5 hp; 6 x 8 in. , 5 hp; and 9 x 12 in. , 5 hp).
Cutting chamber with similar pressure
SIDE model but for automatic feeding or control of manual feeding.
Shurfeed granulator is for machine
Side and center grain of bulky parts.
The material falls in front of the rotating tool and quickly granulation through the cutting action without anti-excitation.
Throat size of 14x16 in. to 24 x 42 in.
Up to 100 horsepower and 4000 lb/hour throughput.
The unit is sound-proofed. Heavy-
Central granulator on duty for 16x26 years. , 24 x 41 in. , 36 x 56 in.
, And 36x114.
The horsepower runs from 50 to 600 and the throughput reaches 15,000 lbs/hour. Hot-
Fusion granulator (HMG)
For extrusion, blow molding, wire insulation and compounding.
The cutting chamber allows air cooling of hot particles for rapid production without gluing.
Most of the hot material can be restored to 600 F without preheating.
The units include granulator, blower, cyclone separator and related pipe works for 8 × 8 in. , 10 x 10 in.
16x27 in. throats;
Throughput reached 1200/hour. Feed-
The roller granulator handles all types of film and flakes. Double-
Angle cutting is suitable for OPP and LLDPE Films. Slow-
Speed granulator for cutting room 6x7 in. , 8 x 7 in. , 11 x 7 in. , 16 x 7 in. , and 2-, 3-and 4-
Hp drives are most commonly used in gate pick-ups and robots for automatic feeding.
AFS fine grinding for rotating formed PVC and PE.
The model number is 32.
There are 125 hp drives. Also de-
Clean and re-grind dust removal system. S. HOWES INC.
Eureka granulator is compact, sturdy, simple in structure, with few moving parts and low in running cost.
Cut the material between two knife rings with almost the same rotation speed.
The centrifugal action forces the material between the tool rings to go out and cut it into size to discharge the product quickly, efficiently and simply.
Granulator parts including the new ring provided. IMS CO.
Features of vertical granulator 20 【degrees]double-
Shear blade action. Standard two-or three-
Blade rotor or high
Multi-blade staggered efficiencycut rotor.
Handle all the plastic, from polycarbonate to soft plastic.
4 sizes of 5 horsepower, 10x8. 5 in.
Throat to 20 hp 24x12 in. throat. Heavy-
Castors on duty and mute to 85-
90 dbA is standard.
International Process Equipment CompanyRotomill air-
The wear crusher makes the chopped plastic into powder without generating heat. Heat-
Sensitive materials can be ground without low temperature treatment.
Lab and three production sizes from 50 to 800 hp.
Complete systems with feeder, collection and/or pollution control equipment are also provided.
Italian Trade Commission information on various equipment provided by Italian companies to reduce the size of plastic waste.
Jacobson llc equipment includes shredder, granulator, bale granulator and air-
Sweep the mill. Hi-
The torque shredder uses a full diameter shaft before granulation to reduce large parts.
It is also a standard granulator and a bundle granulator for the whole rubber or Ding. Air-
Sweep the mill to reduce the plastic to 100-mesh.
The stacking arrangement provides shredder and granulator to reduce the large gate, gate or clear Mill to 0. 125-in. Air-
The swept pulverizer can accept the parts and reduce them to 100 to 240 mesh.
In addition, a bag granulator is provided for handling the entire synthetic curing and uncured rubber bag, which can be reduced to 100% 0. 25-in.
Calculated at the rate of lb/hr in 2000. JEFFREY DIV. INDRESCO INC.
The rotor size of the hammer mill comes in from the month. to 40 x 72 in. Both swing-
Types and rigid hammers are available.
The shredder frame is sturdy and durable, and the internal surface is protected by removable wear
Steel-resistant liner.
The overall metal removes most of the tramp metal.
KEMUTEC Group
KEK General Mills can use a variety of fixtures
Disc and turbo/screen-
Type Grinding medium.
Milling can be carried out under inertia
Gas, cooling or low temperature conditions.
The factory is usually 50-
500 Micron, up to 100 tons/hour.
KEK centrifugal sifters provide pull
Stripping off oversized and exotic materials by means of a sieve, classifying and conditioning bulk materials, controlling the reduction in the size of fragile materials, and even removing liquids from suspended mud, paste, or solids
KIEFEL Technology Co. , Ltd.
Granulator for continuous online processing of waste materials. Rotary cutter.
Zigzag feed roller. High-
Ground plastic waste without static electricity. L-
Size from the R system granulator of 8 × 6. throat and 3-100 hp. Two-and three-
Blade open rotor, high
Alloy steel knives, noise levels, and heavy duty that meet OSHA requirements-
Construction on duty.
Maguire Products Co. , Ltd. Radial beside-the-
A pressure granulator with a rotor, moving around the vertical axis of 1750 rpm in a circular path, producing a high level of centrifugal force, driving the waste through the tool, particles through the screen. Two-
Stage shuttle machine granulator can automatically reject parts with large volume or difficultyto-
Treat waste to highQuality grinding again.
In the first phase, large parts are reduced to small pieces using a shuttle, and in the second phase, the radial unit produces particles.
The system is designed to replace heavy duty with higher costs-
Combination of Granul granulator and Shredder/granulator. USG high-
Large Capacity granulator-
Volume recovery operation for granulation of large and tough materials.
Small gap between knife and screen, high air-
High flow and high rotor speed lead to high throughput.
Marathon reduction solution
Shaft shredder, grinder, knife pig, granulator and chipper.
Matsui United States limitedOffers Plas-Aid low-
Fast speed, no screen grinder, low noise, dust nextthe-press use.
Designed for quick and easy cleaning during material changes.
Hard cutting chamber and vacuum suction
Out port is a standard feature. MILACRON, INC.
Plastic Technology Groupfeed, top-
Feed and vertical granulator of various sizes.
The optional sound insulation limits the noise to 80 dbA. Two auger-
The average throughput of the feed model is 175 and 275 lb/h and the throat size is 8 × 8. and 10 x 10 in. Two top-
The Feed model suitable for robot feed provides an average throughput of 150 and 225 lb/h with a throat size of 6x8. and 9 x 12 in.
The upright granulator with a throughput of 250 to 700/hour has a throat size of 6x8. to 16 x 32 in.
Miller Manufacturing
PVC pre-mill and pulverizer can be reduced by up to 36-in. -O. D. , 2-in. -
From coarse waste to powder.
Two sizes of feed chute and pre-slot
20-less grinder
Up to 6000 lbs/HR ft segment pipe to chip.
The chip is crushed into powder at a speed of 1000/hour.
Montgomery Industrial international scale-
Reduction machines for crushing and crushing foam, etc.
MPG services & SalesMP beside-the-
1-press bed granulator for robot, manual and conveyor feed
400 hp short-
Stop the rotor and hinge Hopper.
IM granulator with screw bolt
Heavy rotor knife-
Apply for duty.
MA spiral granulator for three types of pressureplate molds.
MT web granulator for in-
Hot forming of wire.
CS unit for heavy duty
In addition to paper and film, you can also apply for duty.
The 5 to 100 horsepower shredder includes the FL Series. Thirty-
There are four models to choose from.
Mengsen Machinery Co. , Ltd. , INC.
Classification reduces rotary tool screens in fragile and fiber waste or inside
Process the material into particles or semi-particles
Fine granularity. Low-speed hi-
Large reduction of torque shredderto-
Crushing the material to a controllable particle size, reducing the volume by 75-80%.
Pin grinding for fine grinding and broken pieces. De-
For better dispersion or flow, the agglomeration will separate the materials of compaction or agglomeration.
Compression fibers, film and foam of NETZSCH paste; convert hard-to-
Free waste management
There is no obvious degradation of the flowing dense particles.
The throughput of the three models reaches 1500 lbs/hour.
Rotor diameter cutting granulator. to 63 in.
The width of the machine is 94 in.
Feed and discharge accessories such as conveyor belt, bundle cutter, guillotine, grinder, blower, cyclone and dust filter can be provided.
Stainless steel or nickel rotor.
Throughput reached 15,000/hour.
General grinding, grading machine and streaming-
Bed spray mill for fine grinding to 2 microns and air classifier for product separation to 2 microns.
New Hebo companyHeavy-
Responsible granulator for block and cleaning. Compact-
Design the granulator for paper, film and bulky parts. High-
Speed Disk pulverizer for medium sizehard, impact-
Resistant to crushed materials.
Grinder for specific requirements such as pipes and profiles, as well as hot-
Fusion granulator and guillotine.
NUCON mighty company.
See Wittman. OSPREY CORP.
Grinder series for film, paper, fiber, pipe/profile including integrated feed and discharge systems.
Solid rotor structure with herringbone, oblique blade design and compensation bed knife. Heavy-
The working bearing housing maintains rigidity and proper rotor alignment and is subjected to high impact stress. Maintenance-
Free bearings protected by rotating end plates and shaft seals to prevent product contamination.
Pullman pulverizer Co. , Ltd. , INC.
The pulverizer includes turbine, disc and one-pass or closed-
Circuit grinding.
Interchanging grinding parts.
Turbine and Disc mill for hot environment grinding
Sensitive material.
Turbine and Pin Mill for low
Temperature or low temperature operation.
Granulator in various configurations in Diam.
From 6 to 100.
There are also models for long scrap, such as siding or window frames, for Crushers of pipes below 60in. diam.
Precision knife grinding for grinding film.
Encryption system (PFV)
Continuous low
Conversion of film, foam and fiber to free temperature-
Particles flowing.
The PERRY video x LLC was rebuilt from 1 to guarantee the granulator. 5 to 300 hp.
Various throat sizes with solid and open rotor
High discharge or pneumatic discharge from warehouse, drum or Gaylord.
North America, PiletINC.
Cutting machine for cutting fiber, film and tires.
Can include feed conveyor, metal detector, suction inlet and pick-up Portaway conveyors.
Cutting width of 1120 in. , speeds of 50-
Cut 400/minute with a length of 0. 25 to 20 in.
PLASTEC North America
Large Moditec availablerange, slow-speed (25 rpm)
Screen-Free granulator for 4x5 in.
Mini-Gloria
Molded to 29x33 in.
Model for handling large parts of car bumper and thick section.
The lab is available for customers to try out.
Tria traditional granulator for injection molding, blow molding, extrusion and thermoforming is also provided.
Specializing in water blowing mold-
Standard cooling machine.
The design includes tool-free machine opening and screen stand design.
Plaster Products crush hard, brittle, soft, reunited materials and materials with low melting points through air impact Mill.
The opposite compressed air flow creates a powerful collision for precise control of particle size.
It is reported that energy ranges from 100g/hour to 5000 lb/hour, 20% less than other units.
Study the model to crush 10 g samples.
Precision Air transport
Three compact models
Production line granulator system suitable for pneumatic decoration treatment system for any film or paper application.
All devices with replaceable screens are from 0. i25-to 1-in. diam.
Holes, two to six rotor configurations, the cutting gap is less than 0. 0002 in.
, \"Shaft-less\" cutting chamber, open rotor with minimum pressure drop, long life sealed bearing, flange-
Installed motor and quiet scissorsaction knives.
Models include 78-GP series (4 x 7 in. inlet), 9832 series (9 x 5. 5 in. inlet), and 811-GP series (8 x 11 in. inlet).
The Rolmaster series roll guillotine can safely cut the film or paper from the hollow core.
During the cutting process, the hydraulic power knife wire cuts along the longitudinal center of the roller to the top of the core and puts the cut material into the waste box or conveyor.
Complete interlocking and safety protection devices reduce the labor force with rolls.
The core can be reused to eliminate the contamination of the core paper, and multiple rolls with different diameters can be cut.
Precision machinery Systems Co. , Ltd.
The coolita encryption device that reduces the volume of waste EPS uses high pressure to achieve volume reduction instead of heat or chemicals.
The density of ordinary EPS can reach 18 lb/cu ft in units.
There are two designs.
A person has a horizontal body, on the hydraulic controlled partition door in front of the machine, compacted the material with a hydraulic ram to produce a separate compacted material.
The second design replaces the front door with a tapered extension, allowing the processing of continuous dense material bands.
Process Control Company
Film granulator for in-
Re-processing of waste production lineCarbide with anglecoated knives.
Size from 10x12. to 15 x 27 in. with 20-to 100-hp motors. Open-
The rotor is designed to cool efficiently and increase throughput.
Part of completely automatic scrapping
Recycling System (ASR)
, Including a roller feeder, a trim pick-up system, and a refeeder for the return of ground waste to the production extruder without the need for a further granulator. QUADRO, INC.
Low rpm, centrifugal acceleration, Eddy current mode, 360 for Comil cone grinding [degrees]
Feed screen, grinding element of special shape.
High lb/hr/hp, low fines, low dust, quiet operation and friction heat elimination are available even with fragile materials.
Capacity from 250/hour or more to 50,000/hour.
Fast granulator Co. , Ltd. Beside-the-
Screw press-
Line, center, hot, pig-type, and hot-
Fusion granulator.
In addition, belt conveyor, sound housing and room, pneumatic conveyor and turn-key operation are included. Beside-the-
Press the model from 3 × 6. to 18 x 31 in. , 2-to 60-
HP motor, throughput from 170/hour to 2500/hour.
For blow molding, the model handles hot parts or parts.
Throat size from 7x9. to 32 x 50 in. , 5-to 200-
HP motor, throughput reached 6000/hour.
About the noise level. 82 dbA. Central heavy-
Working model from 12x24 in throat size. to 32 x 50 in. , 40-to 250-
HP motor, throughput from 1400/hour to 10,000/hour. Hog-type, extra-heavy-
The Duty model offers 12x24 in. to 24 x 42 in. throats, 50-to 100-
HP motor, capacity of 900 to 6000/hour. Hot-
Melting model of granulation under 300-
Starting from 7x9 500 F. to 32 x 50 in. throats, 5-to 250-
HP motor and 165-
Capacity is 3000/hour.
Recycling Technology Co. , Ltd. Supplies low-speed, low-
Vertical rotary grinder with noise.
There are also horizontal grinding machines and magnetic separators.
Restoration Engineering Co. , Ltd.
Grinding crushing system, environmental and low temperature system for grinding llannan, low density polyethylene, high density polyethylene, PVC, ABS, san pet, nylon, acrylic resin and other polymers.
All systems equipped with horizontal grinding rooms can produce high quality powder at low energy consumption.
All rolling mills have a push/pull gap adjustment function from the outside of the mill housing, so there is no need to use a company-replaceable disc --
Wear-resistant plate.
The system is PLC-
Controls and is equipped with a large capacity sieve, a hinge cyclone separator and a quick disconnect pipe, which enables quick cleaning between product replacements.
Available in low temperature models of 75, 100, 400, 600 and REC 100.
Resource Recovery SystemsSUB.
Herbold meckesheim Co. , Ltd. from Herbold Meckesheim (Germany)
Grinder and other sizes-
Reduction system including plastic special shredder embedded in metal
Such as tires or window frames.
The throughput of the maximum size model HGM60/145 is 6000 to 8000 lb/hour.
Rotoglen International Limited
Starting from 8x8, the granulator with the cutting room is complete. to 33 x 60 in. and 5-to 300-hp motors.
Heavy standard model-
The work and features are cut round feed, and the welding is firm;
Double cutting action on rotor and bed blades; heavy-
Piloted pilot cylinder bearing; easy-access swing-
Move the screen and the screen Holder down;
Solid steel wheels on most models;
Sound insulation, double
Wall Hopper and base;
Security features, if you try to turn the machine on while operating, you can cut off the power supply.
There is also a blower/cyclone system and a fine separator system. SHRED-TECH High-
Torque shredder and complete reduction system for handling dense and bulky plastic materials before granulation.
Specialist company of scale reductionBi-Cutter two-stage, press-
On the side, the screen-free granulator produces particles with uniform quality.
Low rpm and horsepower allow low maintenance and low
Energy consumption.
There is an S-in the first phase-
Shaped cutting edge (15 rpm)
Then put the smaller pieces of the second phase.
The second stage of rotary and fixed tool cutting (45 rpm)
Cut the reduced pieces into even small particles.
For easy cleaning, the side plates on the unit swing up.
S-also available-
Tool accessories and services. SPADONE INC. Fully self-
Cutting machine for cutting head of air or hydraulic operation, especially suitable for recycling and recycling.
Standard line function 24-, 29-, 39-, 54-, and 60-in.
The cutting stroke is the cutting width of 40 in.
Fully automatic cutting line including compaction can be provided. Model 24-
10 features 24-in.
Cutting width, can be installed 10-or 12-in.
Cylinder, or 5-in.
A hydraulic cylinder with a force of more than 14,000 is provided.
All knives have protective devices and are equipped with-
Fasten the double button for safety.
SSI crushing Systems Ltd.
Two new or rebuiltand four-
Shaft Rotary shear shredder and single
Shaft rotary grinder for loose and packing film, cleaning, fiber, engineering resin and other large or bulky material primary size reduction.
There are also Municipal and scrapped balers and manual balers.
Turnkey and custom online integration with new or existing systems.
The pound system.
Sterling BlowerSelf-Bring your ownfeeding size-
Restore system called Veloci-
Cutting the knife eliminates other expensive, problematic ways to feed the granulator.
Ideal for continuous flow edge trim, scrap bottles or other scrap parts.
VECOPLAN, LLC ReTech RG52 rotary grinder handles large scrap and cleaning without prior reduction, and provides consistent-sized, usable particles in one pass. It is low-speed, low-hp, low-
Fast cleaning design with noise and features, optimized front
Feed control device, oversized outside rotor shaft bearing and advanced single
Tool blades that wear for a long time cut the rotor.
Limited Lifetime Warranty for rotor cylinders and shafts.
Wilma America LimitedOffer single-shaft and quad-
Shaft shredder and heavy-duty-On duty and nextthe-
Press machine. Two-
Stage system with Shredder/granulator combination. WITTMANN, INC.
Vitman granulator includes the small sidethe-
Pressure Device for large central system with adjustable rotor and bed knife for constant cutting circle; low-
High speed screen-free granulator for high quality RE-grinding; and shredders.
All units are designed specifically for a variety of parts and materials. WYSSMONT CO. , INC.
Loose solids such as condensation, wet cake, Crystal, profile, grain, wax, fiber, block, brick, paper that usually does not require a ball, Hammer or Pin Mill.