Anti-static castor environmental protection and the suitable environment

Anti-static casters have different materials, such as rubber, super synthetic rubber, nylon, rubber prices are cheaper, good use effect. 3 of conduction coefficient: 10 square between 5 to 10 square ohm. Antistatic coefficient: 10 3 to the power of the nine to 10 ohm range; 9 of anti-static coefficient of 10 square between 10 of 12 power ohms. Environmental protection: 1, it effectively resolved not to leave his mark on the ground, keep the floor clean and tidy. 2, it push light, shock absorption, smooth operation, to reduce the noise. 3, it around the electrostatic adsorption, effectively protect the health of the workers. 4, castor contains no lead, lead is harmful to human body material. Applicable environment: do not use in acid and alkali corrosive environment, avoid contact with oil stains, these are all can affect the conductivity of castor. If your work environment is a computer, electronics, medical equipment factory is a place like this, conductive castor is your better choice! Electroplating is a common technique in the production of castor stent, is for the sake of the mechanical products for decorative and protective of various functional surface layer, and can repair the wear and machining inadvertently lead to mistakes. On the electrode surface current density generally refers to the current value ( Such as wheel plating part) , usually with A/dm2 as A unit of measure. When DC current through the electrode polarization is usually refers to the phenomenon of electrode potential deviating from the equilibrium potential. Under the effect of electric current, the anode potential to the moving direction, referred to as the anodic polarization. The cathode electrode potential to negative direction, referred to as the cathodic polarization. Hydrogen embrittlement parts in oil removal, strong corrosion electrochemistry and castor electroplating process, as part of the hydrogen reduction state, hydrogen atoms permeate formed in the substrate metal or coating stress, reduce the toughness of the matrix metal and coating, lead to brittle. The roughness of the coating is mainly due to the main salt concentration, solution ph, temperature and current density and solid impurity of the improper control of too much. Coke burning is mainly due to the main salt concentration, ph, temperature and current density of the improper control of sponge deposition, crystal bulky, osteoporosis, and black. Plating solution in the plating solution pinhole insufficiency, the ph value is abnormal and excessive organic impurities and plating hydrogen, will cause the phenomenon of hole tip coating size have differences. Due to the heavy metals in the solution of outliers, or excessive organic impurities of impurities, wetting agent, pH coating, etc. , can cause micro hole, big hole or sharp convex wait for a phenomenon. Brightener is disorder, excessive organic impurities, the cleaning process is poor, improper control of temperature and current density, etc. , can result in uneven coating color, partial ash, darker wait for a phenomenon. Excessive foreign matter in pretreatment before electroplating, plating solution, improper control of pH and current density, etc. , cause the coating and substrate binding, expansion or falls off phenomenon.