Castor how to maintenance and how to prolong the service life of the -

Castor how to maintenance and how to prolong the service life of the - Adjust the foot - 【 Industrial casters 】 Manufacturer of industrial casters universal wheel, adjust the foot is mainly refers to a caster wheel used in machinery factory or products, industrial casters can choose advanced imported reinforced nylon ( PA6） , super single wheel made of polyurethane, rubber, industrial casters integral whole with high impact resistance and strength. Beijing KNT Chester technology co. , LTD. It is suggested to castor for regular maintenance. Industrial casters and maintenance matters needing attention: 1, to avoid improper use or overload, universal wheel at the time of heavy to light on the cart. Rough pavement of high speed or heavy pressure wheels will cause the wheels or equipment damage. Therefore, please check: 2, brackets and fasteners: universal wheel the loose wheel shaft and the nut tightening and check weld or support plate for damage. Overload or crash will lead to distortion. Distortion and baroclinic stents to overloading of premature failure caused by wheel on the individual wheel. 3, lubrication: add lubricating oil regularly, wheels and bearing can use for a long time. Must be between 4, fixed industrial casters and its axle on a straight line 5, if the fixed rotation and industrial casters industrial casters, all industrial truckle so universal wheel must be compatible with each other how can we make the caster and longer service life is a problem concerned by many users, the following focuses on: 1, castor, correct and reliable installed on the position of the design. 2, installation of castor scaffold must have sufficient strength, materials must be reliable. 3, the function of the caster shall not be changed, also not affected by installation. 4, turn shaft must always vertical movement. 5, fixed between the caster must instead of axle on a straight line. 6, if only using rotary trundle, they must be consistent. 7, if fixed rotation and castor castor, so all the caster must be compatible with each other, and subject to manufacturer's recommended.