Castor should pass test only can into the market

We live to see the chair casters, furniture casters on the table and brought great convenience to our life, in fact, castor is not produced will be able to use, he needs through a series of tests can be put into market, different castor test requirement is different, the eastern rui castor show all casters through which tests can be put into market. Heavy-duty casters resistance performance test: test the performance of castor should keep dry and clean, place the caster in a piece of insulation on the metal plate with the ground, keep the wheel edge in contact with the metal plate, on the caster wheel load of 5% to 10% of the nominal load. With the insulation resistance tester ( Nominal open circuit voltage of 500 v, determination of the resistance value of fluctuation within 10% and no more than 3 w) in the wastage of the products The electric resistance between castor and metal plate. In type conductive castor, resistance is not more than 104, and the resistance of the antistatic caster should be between 105 and 107. Impact test: any goods transportation, use, preservation and other situation will impact vibration may be produced and make the product a certain period of time can't normal use, the furniture with its type, weight and other characteristics are often vulnerable to the impact, and at the bottom to determine whether furniture placed truckle is more smooth should possess good shock resistance. Static load test: castor should always be steady running on the ground, but it is almost a state of pure theory. On the uneven surface, or in a threshold, orbit and potholes, castor will brief off the ground. So when they suddenly overloaded or four casters in three only contact with the ground, must carry the entire load of furniture. Reciprocating wear testing: castor reciprocating wear test to simulate the casters in daily use the actual rolling, the two points with and without obstacles obstacles test test, in the process of test are not allowed to have a castor or other parts from, at the end of the test each castor should be able to drive its normal function, test after the completion of the caster roll, circuition or brake function should not be damaged. Rolling resistance and rotation resistance measurement: when castor mobile or to control the driving direction, the power must be on the object to the caster and to overcome certain resistance, resistance depends on the size of the: weight, wheel diameter, material, round face shape, castor/news_180 rotating field situation. Castor test east castor