Polyurethane (pu) used in the industrial casters need how long a lubrication

Polyurethane (pu) used in the industrial casters need how long a lubrication, generally castor accessories have a lot of kinds, is our common brake, when choosing such castor accessories is a good choice, through the use of the requirements we can know whether you need when buying this kind of accessories; While less common parts is very much, must be equipped with some accessories are process demand, some are for beauty and other reasons. Put grease on shaft seal ring and roller bearing friction within the site, can reduce friction and make more flexible rotation. Every six months on a normal lubrication, the car each month after cleaning for wheel lubrication, visual check wheel abrasion of the wheels. The wheel rotational impeded associated with fine red rope and so on sundry. The intertwining of anti-wind cover can stop these stuff. Castor too loose or too tight is also another factor, to replace the damaged/castor wheels to avoid the unstable rotation. Also need to pay attention to single wheel structure of castor, high-quality castor structure can fully consider the actual demand, flexible manipulation, namely the castor products starting force and rotational force to be able to comply with national production standards, if need in the practical use of high load capacity, high stability, can consider to double design. In general, the diameter of the castor need not big, according to the actual situation to select the diameter of casters products, because the diameter is too large will go against castor castor products placed, at the same time, the bigger the diameter of casters products the price is more expensive. Polyurethane used in the industrial casters need how long a lubrication, more news and information about pu castor please click: hynews / 349. html