Teach you the methods to choose the one pu castor accessories

Teach you a recruit to choose pu castor fitting method, the characteristic of polyurethane pacify casters: installation height: refers to from the ground to the vertical distance between equipment installation position, the installation of the castor height refers to remote the largest vertical distance and castor base plate and the wheel. Stand to center distance: refers to the vertical line to the center of the wheel core center rivet horizontal distance. When equipment has fundamental impact or vibration of the castor instantaneous load bearing capacity. Static load and static load static load and static load: castor can bear the weight of the under stationary state. Static load generally should exercise load ( Dynamic load) 5 ~ 6 times, static load should be at least 2 times the impact load. Hard, narrow wheel than soft, wide wheels turn more easily. Rotate wheel radius is one of the important parameters, short turning radius increases to the difficulty, too much will cause the wheels wobble and shorten the life. In general castor accessories have a lot of kinds, is our common brake, when choosing such castor accessories is a good choice, through the use of the requirements we can know whether you need when buying this kind of accessories; While less common parts is very much, must be equipped with some accessories are process demand. Hard tyre surface is suitable for the floor exercise in a soft and smooth, and a soft tyre tread in hard or rough surface rolling more flexible, including most of the outdoor ground. When choose the time of the wheel, take into account all the ground of the special situation: uneven, sink, threshold, terminal strip. The wheel, the greater the more soft, more easily in orbit or similar cases rolling on the ground, the wheels of the soft can also protect the surface from being damaged. Teach you a recruit caster fitting method choice, more news and information about pu castor please click: hynews / 276. html