the main purpose of castor oil -

Castor sesame seed oil is a non-
Dry Oil type, large viscosity, large proportion, in-
18. At 500 ~ 600 of the high temperature does not deteriorate, do not burn.
Castor Sesame oil is a colorless or pale yellow liquid that is easily soluble in ethanol and slightly soluble in petroleum ether, gasoline and kerosene.
Castor sesame seed oil is a non-
Dry Oil type, large viscosity, large proportion, in-
18. At 500 ~ 600 of the high temperature does not deteriorate, do not burn.
Its unique Nature determines its specific use and high economic value.
Castor sesame seed oil turns into hydrogenation oil through hydrogenation, which is a high
Used for aircraft, ships, cars, hard grease with high boiling point, advanced lubricants
Speed machinery and machine tools.
Through further processing, many derivatives with a wide range of uses can be produced.
Epoxy soybean oil is a new chemical raw material, and more than 1980 synthetic applications have been reported in the international community.
It is an ideal surface active agent for closed phenol resin
Foam is also an important part of steel and aluminum tensile extreme pressure oil.
After hydrolysis, Castor sesame oil produces mixed fatty acids and glycerin mainly based on ric Sesame acid.
Mixed fatty acid is an important raw material for plastic heat stabilizer, and glycerin is a widely used chemical.
Abstract: castor sesame seed oil is a simple and easy-to-get negative surface active substance with significant acid resistance, alkaline resistance and hardening water.
It is mainly used for adding fat agent, fiber matchmaker, lubrication aid, metal detergent, smooth agent, polishing agent, cosmetic raw material, etc.
Castor sesame oil, which is soluble in alkali, can be made into sebacic acid and secondary bitter taste. It is one of the largest castor sesame oil products in China.
Mainly used in nylon
Made of 610, 1010 and other fine plastic, also used as plasticizer, high
Grease, cosmetics, pharmaceutical and polyester film are important raw materials.
Castor Sesame oil is an important pharmaceutical and spice intermediate. It can get 11 acids and 7 peptides.
Dehydrated palm oil is an important raw material for archival coatings, special inks, synthetic resins and adhesives.
Castor sesame oil obtained by oxidation of nitric acid can obtain artificial azelaic acid lipid products, which are widely used in the preparation of spices and can also be used to make good cold and heat-resistant plasticizer.
There are many uses for Castor sesame oil, but the most commonly used is as a convenient agent.
When castor Sesame oil is mixed with other oils, it will become an effective skin care product.
When the castor Sesame oil is mixed with sunflower oil, it becomes an oil-like mixture, which can absorb the grease of the pores of the facial skin.
First, take a container and mix it with 3: 7 sunflower oil and sunflower oil respectively.
Pour a small amount of oil-like mixture into your hands.
Gently apply the oily mixture to the face to ensure that the whole face covers the mixture.
Gently massage the oily mixture into the facial pores.
Wait about 5 minutes, the pores absorb oil.
Second, turn on the hot water faucet until the water gets hot.
Soak up the water with a clean towel and then put the hot towel on your entire face.
This will open the pores of the face and allow the pores of the face to release grease and other contaminants.
Finally, put the hot towel gently on the face until it cools down so that the oily mixture can absorb the oil on the face.
Then wipe the oil gently on the face.
Do not scrub by scrubbing, repeat it two or three times, or until all the grease is removed from your face.