How often need to lubrication pu castor

How often need lubrication on pu castor? Caster wheel bearing ability, also known as dynamic load in caster wheel dynamic load is different due to the test in a different way of the factory, material of the wheel will have different and different, the key is to support the structure and quality can impact and shock resistance. To: hard, narrow wheel than soft, wide wheels turn more easily. Rotate wheel radius is one of the important parameters, short turning radius increases to the difficulty, too much will cause the wheels wobble and shorten the life. For different using environment have different requirements: factory with castor is different from firms with casters, tool for castor is different from a hospital bed with light-duty castor, shopping cart with the requirements of the caster must be completely different from those for carrying heavy load in the factory of the caster. The ordinary bearing - Castor of sliding bearing is the simplest form of bearing or friction. They can shock, almost no maintenance, and on the basis of the characteristics of materials, corrosion resistant. Check after repair wheels, determine whether the bolt and nut tightening, as far as possible at all to use the locking bolt washer or locknut. If is loose, tighten the immediately. If the inside of the bracket with the loose wheel will be to the rotation of the wheels was damaged or not. When we install the Korean castor, lock nut or locking washers should be used. Expansion plug pole of castor installation to ensure that the plug rod firmly installed within the set. Add lubricating oil regularly, wheels and bearing can use for a long time. Put grease on shaft seal ring and roller bearing friction within the site, can reduce friction and make more flexible rotation. Every six months on a normal lubrication, the car each month after cleaning for wheel lubrication, visual check wheel abrasion of the wheels. The wheel rotational impeded associated with fine red rope and so on sundry. The intertwining of anti-wind cover can stop these stuff. Castor too loose or too tight is also another factor, to replace the damaged/castor wheels to avoid the unstable rotation. How often need lubrication on pu castor? More news and information about pu castor please click: hynews / 274. html