Pu castor for lubrication after cleaning

The loose wheel shaft and the nut tightening and check weld or support plate for damage. Overload or crash will lead to distortion. Stent deflects the overloaded pressure distortion on individual round wheels and cause premature failure. If it is lever type caster, should be to tighten the nut or solid rivet and ensure equipment mounting bracket without bending and pole installed correctly. When we install the Korean castor, lock nut or locking washers should be used. Expansion plug pole of castor installation to ensure that the plug rod firmly installed within the set. Add lubricating oil regularly, wheels and bearing can use for a long time. Put grease on shaft seal ring and roller bearing friction within the site, can reduce friction and make more flexible rotation. Every six months on a normal lubrication, the car each month after cleaning for wheel lubrication, visual check wheel abrasion of the wheels. The wheel rotational impeded associated with fine red rope and so on sundry. The intertwining of anti-wind cover can stop these stuff. Castor too loose or too tight is also another factor, to replace the damaged/castor wheels to avoid the unstable rotation. Usually have nylon wheel, wheel super polyurethane wheel, high-strength polyurethane wheel, high strength synthetic iron, iron, cheer. Super polyurethane wheel, high-strength polyurethane wheel in both indoor and outdoor floor, can meet the requirements of your handling; High strength synthetic lugs can apply to hotels, medical apparatus and instruments, floors, wooden floor, ceramic tile ground for low noise quiet on the ground when walking driving; Nylon wheel, wheel which can be applied to uneven or there are materials such as scrap iron on the ground; While pep talk round applies to soft light load and road surface is not flat. / news_86。