Pu castor safe use and maintenance

Users should pay attention to the correct operation and maintenance of equipment. If the operation mistake will lead to some of the products are easily damaged and possible damage to the user. And the correct use of products and effective maintenance of the casters will be best work effect. 1. Castor general safety operation of equipment do not pay attention to the light to take light put as far as possible don't overload high speeds to avoid operation will produce strong shock and vibration, otherwise it will lead to castor, wheels and the device does not work. 2. Check the equipment of the structure and fasteners, rotating equipment, regular in the side and end inspection to check the following items: check whether there is a fracture of weld or assembly department. Regularly check and tighten the screw and nut; Check equipment due to overload or violent impact caused by the deformation of structure, such as heavy duty caster stents have might due to uneven bearing wheel running damage; Castor, if it is plugged into dry assembly to check equipment assembly hole not bending deformation, and can work closely with inserted dry; Try to use the locknut or check washer to install locking casters; If the caster is using expansion rubber rod assembly, should determine the position of the expansion rubber sets of fastening. 3. Lubrication of casters and wheels. Regularly for castor wheels or filling grease. Add frequency according to the actual use of the specific circumstances. In general, refill once every six months the lubrication grease, but in the dry and corrosion environment, best append a lubricating oil every month. Every time after washing the caster equipment, also pay attention to the filling grease. Choose lubricating grease, according to the actual use of environment, special high temperature and special low temperature environment, should choose appropriate lubricating grease. 4. Castor maintenance and inspection according to the wear condition to judge whether the legs of the caster and excessive use of regularly, if the rotation of the universal wheel bracket joint looseness, suggested to replace the whole bracket assembly or the whole castor products. If the choice of universal wheel device is through the bolt and nut locking, to ensure that the assembly of solid and reliable. If universal wheel bracket rotation is not flexible, should check whether be corrosion or dust, yarn such as adhesion to disc beads orbit, recommend replacing the entire activity support if necessary and the castor products. If the device is assembled in one side of the directional wheel casters, to ensure that the leg of directional wheel without bending deformation, if there is a deformation, when necessary to replace the leg or the directional wheel products. 5. Maintenance and check of single wheel through visual wheels can be detected on the surface of the tyre wear. Tire uneven wear below indicate the working situation of the wheels, some stitches spun yarn and other debris may be winding wheel, wheel bolt and nut, clean up the sundry, check whether there is any damage on the wheel bearings, if there is no damage to the parts, to assembly and use. Often occurs if the wheel is sundry, wanda castor suggest user assembly against the cover to avoid winding. Wheels to replace or reinstall, to ensure reliable axle bolt and nut connection, as far as possible the use of check washer or locknut. 6. Caster wheel brake maintenance and testing for casters with brakes, brake work is normal, should be inspected regularly every day or is going to make a brake inspection before each use. Have multiple brake caster equipment to assembly, every time can only lock the brake casters to try to promote the equipment, in order to check each trundle brake performance are in good condition. If due to wheel wear and tear or damage to the caster wheel brake function failure, please immediately change the wheel, then to test the brake system. If the caster wheel braking system itself institutions appeared damaged, need to repair or replace the brake. Every time after replacement of brake, retesting caster wheel braking performance. Wanda castor provides a variety of performance and design of caster wheel brake, please contact us. 7. Truckle under external force drag operation rely on outside force traction device, either with conveyor belt or tow rope, or drag directly by traction machine, all need to choose for the design of special castor, contacted with manufacturer for Suggestions before choosing, consulting relevant information to determine the most suitable castor products and equipment. This paper label: pu castor heavy-duty casters industrial casters a: castor knowledge introduction next: pu castor - The pillar of industrial casters