What is the antistatic caster wheel? Anti-static castor environmental protection?

What is the antistatic caster wheel? Anti-static castor environmental protection? The difference between the conductive wheel and anti-static wheel: 1, conductive wheel is used for static electric current conduction between sections and activities, it requires that the conductive ability is stronger, resistance to smaller. 2, anti-static wheel is used to release the induction of electrostatic charge, release the electrostatic charge current is very small, so its conductive performance requirements is not high, can use larger resistance materials to do it. 3, conductive, antistatic round these two materials differ, but can be used for anti-static conductive round. In the aspect of environmental protection: 1, it effectively resolved not to leave his mark on the ground, keep the floor clean and tidy. 2, it push light, shock absorption, smooth operation, to reduce the noise. Anti-static casters: anti-static coefficient for power 6-10 - - - - - - Nine of 10 to the power ohms; Suitable for computer, electronics, medical equipment factory, etc. Such as some electronics factory in order not to affect the conductivity of electronic products, to install and use conductive wheel, some factories in order to maintain the good performance of the machine, will install conductive castor, used to surrounding the release of electrostatic adsorption, because any surfaces with electrical conductivity, produces a static magnetic fields. The smaller resistance coefficient, flows through the electric current on the surface of the object, the greater the conductivity, the better, on the contrary, the greater the resistance, through the current on the surface of the object is smaller, conductive performance is poor. We produce the caster after numerous validation, performance stability, withstand any test instrument, please feel free to use. 3, it around the electrostatic adsorption, effectively protect the health of the workers. 4, castor contains no lead, lead is harmful to human body material. 5, do not use in acid and alkali corrosive environment, avoid contact with oil stains, these are all can affect the conductivity of castor. Electroplating is a common technique in the production of castor stent, is for the sake of the mechanical products for decorative and protective of various functional surface layer, and can repair the wear and machining inadvertently lead to mistakes. 1, the current density generally refers to the current value (on the surface of the electrode Such as wheel plating part) , usually with A/dm2 as A unit of measure. 2, polarization is usually refers to when the DC current through the electrode electrode potential phenomenon of deviating from the equilibrium potential. Under the effect of electric current, the anode potential to the moving direction, referred to as the anodic polarization. The cathode electrode potential to negative direction, referred to as the cathodic polarization. 3, the hydrogen embrittlement parts in oil removal, strong corrosion and electrochemical castor electroplating process, as part of the hydrogen reduction state, hydrogen atoms permeate formed in the substrate metal or coating stress, reduce the toughness of the matrix metal and coating, lead to brittle. 4, the roughness of the coating is mainly due to the main salt concentration, solution ph, temperature and current density and solid impurity of the improper control of too much.